J V M Tech Eng

LD LASER
1 … 30 mW
SMALL AND VERSATILE:
Due to manual focussing from 30 mm to ∞, you may achive
an extremely fine laserline at any working distance. This
makes the LD laser the right choice for applications with
changing working distances and projection positions. Flexibility
is supported by the small housing, allowing to easily fix
the laser on working place machines or rails.
FEATURES:
Focusable
Point, Line, Cross
Smallest housing
Reverse polarity protected
Available opening angles line:
10°, 20°, 30°, 40°, 80° (standard)
Available opening angles cross:
38°, 62°(standard)Technical Data:
Laser type, Wavelength Diode, 635 nm, red
(optional: 670 nm)
Power supply: 4 … 6 V DC
Application conditions: –10 ... +40 C,
35 … 90 % rel. humidity,
non-condensing
Enclosure rating: IP 54
Divergence: 0,5 mrad
MTTF: > 30.000 h at 25°C
(635 … 670 nm)
Dimensions Length: 81 mm,
Ø 19 mm (front) /15 mm (back)
Connector: M8, 3-pol.

LINE LASERS
Laserpower Product Laserclass* Line length*
1 mW LAP 1 LDL 1 up to 1 m
3 mW LAP 3 LDL 1 up to 2 m
5 mW LAP 5 LDL 1 up to 4 m
10 mW LAP 10 LDL 1 up to 6 m
15 mW LAP 15 LDL 2 up to 10 m
30 mW LAP 30 LDL 2M

LD LASER: SMALL AND VERSATILE

Due to manual focussing from 30 mm to ∞, you may achive an extremely fine laserline at any working distance. This makes the LD laser the right choice for applications with changing working distances and projection positions. Flexibility is supported by the small housing, allowing to easily fix the laser on working place machines or rails.

• Focusable
• Point, Line, Cross
• Smallest housing
• Reverse polarity protected
• Available opening angles line: 10°, 20°, 30°, 40°, 80° (standard)
• Available opening angles cross: 38°, 62°(standard)

CONFIGURE NOWTypical applications

Textiles
Imaging
Automotive
Assembly

Typical tasks

Projection of line
Projection of crosshair
Projection of point

COMPARE DEVICESCOMPARE

Compare devices with each other and find the optimal solution for you. Then adjust your device to your requirements in the Configurator.

TECHNICAL DATAMODEL DATALine lasersNo datashow allCrosshair lasers showPoint lasers showGENERAL DATALaser data show allOptics data show allElectronics data show allHousing data show allSystem data  

FD HD HY Laser Internal power supply 12 … 30 V DC 15 … 20 V AC 12 … 30 V DC 15 … 20 V AC 12 … 30 V DC Laser power 1 … 30 mW 1 … 30 mW 1 … 40 mW Line length 1 … 20 m 1 … 20 m 1 … 30 m Optics 80° fixed focus 10°, 20°, 30°, 40°, 80° manually focussable 10°, 20°, 30°, 40°, 80° manually focussable Protection IP 67 IP 67 IP 67 Shock resistance IK10 IK10 IK10 Special features introductory model precise lines, straightness 0.05 mm/m dimmable laser power for change of line width

MORE PRECISION The further increase of projection accuracy is also based on a new technology: instead of encoders SERVOLASER Xpert uses a magnetic straightedge for reference. MORE FLEXIBILITY In classic SERVOLASER, the moving range was cut half if a fixed laser module in the middle of the rail was requested. That‘s history! The fixed center laser of SERVOLASER Xpert is mounted at the side of the moving rail, the movable modules can pass and use the complete moving range. WHATEVER YOUR TASK IS – IF IT CAN BE SOLVED BY MOVING LASER LINES, SERVOLASER XPERT IS THE SOPHISTICATED SOLUTION FOR FAST AND PRECISE PLACEMENT LAP SERVOLASER Xpert INCREASE SPEED AND QUALITY OF YOUR PRODUCTION SERVOLASER SERVOLASER Xpert Laser colours red green, red, blue Laser power up to 30 mW up to 40 mW, dimmable Precision positioning accuracy ± 0,3 ... 0,8 mm projection accuracy ± 0.18 ... 0.5 mm Positioning reference encoder magnetic straightedge Moving speed up to 200 mm/s up to 1000 mm/s Configurations Moving range ends at center laser Complete moving range also with center laser installed Connectivity RS485, parallel port, exter- nal Ethernet gateway Standard EtherNet/IP™* others on request System single devices only two devices may be joined to a system with up to 4 moving lasers by adaptor