J V M Tech Eng

Order no.: PCE-TC 34Thermal Imaging Camera PCE-TC 34

PCE-TC 34 is a thermal imaging camera used for visual inspection and non-contact infrared (IR) temperature measurement. Ideal for industrial use in electrical, mechanical, and building installations (such as in the auditing of machines, engines, or heating, ventilation, and air conditioning (HVAC) systems), this high-definition, high-resolution thermal imager captures and saves 640 x 480 pixel IR resolution images to the included SD card memory at a refresh rate of 50 Hz.

- IR resolution: 640 x 480 pixels
- Temperature measuring range: -20 ... 350°C / -4 ... 662°F
- Optional wide-angle and telephoto lenses
- Automatically detects hottest spot
- Field of view: 24 x 18°
- Adjustable emissivity from 0.1 ... 1.0
- Frame rate: 50 Hz
- Data storage: SD card

Manufacturer: PCE Instruments

GM ELECTRONICS MAKE PRESSURE METER GMPID001-D-01

Additional Information:

• Item Code: GMPID001
• Delivery Time: 3-4 WEEK

Backed by rich rich industrial experience we are offering products to our customers providing the best services to our customers at reasonable rates

Order no.: PCE-TDS 100HUltrasonic Flow Meter PCE-TDS 100H 

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... +160 °C
- Sensor installation: V, Z 
- incl. ISO Calibration Certificate

Order no.: PCE-VS11Vibration Sensor Switch PCE-VS11

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Catalogue: Control Systems / Sensor / - Vibration SensorManufacturer: PCE Instruments

Model : VH563B - DAA0389-0003Make : J -TECH , USA brandTechnical details:Blow-by Meter. Hand-Held Blow-By Style Gas Flowmeter, 5/8" flow tube.Flow range: 0.40 to 16 ACFMAnodized Aluminum; Flow meter OperatingTemperature: 0 to 200 F (-18 to 93C); Operating Pressure: -5 to 30 PSIG (-0.35 to 2.1kg/cm^2);Accuracy: +/- 2% Actual measurements arerecorded as is; estimation ofuncertainty of measurement is not taken intoaccount.Full Scale; Repeatability: +/- 0.5% of reading;Electronics Temperature Limits: -40 to 150 F (-40 to 66 C); Response Time: 100 msec;Input Power: Supplied by hand-held read-out;Display units: ACFM , LCD,Display Operating Temperature: 32 to 122 F (0 to50 C); Storage Temperature:-4 to 158 F (-20 to 70 C); Batteries: RechargeableNICAD with 10 hourcontinuous use; Recharging: w/ supplied 110 – 240VAC input, 24 VDC output power supply

Engine Blow-By Measurement System Recommended Electrical Connections (separate grounds for lowest measurement error) CIRCUIT BOARD OUTPUT JUMPERS DAA0XXX-0003 ANALOG (0-5V) P3-2 to P3-3 DAA0XXX-0002 FREQUENCY P3-2 to P3-1