J V M Tech Eng

Backed by rich rich industrial experience we are offering products to our customers providing the best services to our customers at reasonable rates

Backed by rich rich industrial experience we are offering products to our customers providing the best services to our customers at reasonable rates

Electronic pressure sensor for industrial applications Process connection: G ¼ A (according to DIN EN ISO 1179-2) Analogue output Measuring range: 0...600 bar

HYDAC,Honsberg make
Simple mounting via clamp-on adapter without media contact ● High accuracy even without thermal compound ● Fast response time ● Replacing/cleaning of the sensor without process interruption ● Pt100 Sensor 3-wire connection of transmitter 4..20 mA, 2-wire connection ● Transmitter programmable via GTL Configuration tool ● GTL720 applicable for Ex areas

Order no.: PCE-DMU 10Pressure Transmitter PCE-DMU 10

The pressure transmitter PCE-DMU 10 can be used for gases, water as well as fuels and oils. The pressure transmitter can be used for relative and absolute pressure measurements.

 

- max. 400 Bar
- Media: gases, water as well as fuels and oil
- Output: 4 ... 20 mA / 0 ... 10 V (selectable)
- Pressure type: Absolute or Relative (selectable)
- Membrane: ceramic
- Accuracy: 0.5 % FSO

Catalogue: Control Systems / Transducer / - Pressure TransducerManufacturer: PCE Instruments

Design for side mounting The principle of operation of these instruments is based on the drive of one or more magnetic reed contacts, placed inside of the measuring rod, by one or more floats. The only moving element is the float that moves, for buoyancy, along the measuring rod, this guarantees extreme robustness and a limited need for maintenance. • Brass – Spansil • Up to 4 switch points • Maximum working pressure 20 bar • Operating ambient temperature -30/+55°C UR 90%. • Standard working temperature up to 105°C. • Executions up to 120°C on request. • Minimum degree of protection IP65. • Built-in temperature sensors, on request. PT – PTC – NTC – Thermostat. • ATEX Constructions (See Multipoint E – Multipoint I series)

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Backed by rich rich industrial experience we are offering products to our customers providing the best services to our customers at reasonable rates

4-digit alphanumeric display / alternating indication of red and green 2: LEDs (display unit / switching status) 3: Programming button 4: Upper part of the housing can be rotated by 345° 5: sealing FKM / DIN 3869 

GMPD003-EX,GM ELECTRONICS MAKE PRESSURE SWITCH

Additional Information:

• Delivery Time: 3-4 WEEK

● Adjustable switch point ● Adjustable hysteresis ● Change over contact ● Plug DIN 43650-A ● Lateral cable exit 

Various pressure ranges between 0 .. 16 bar and 0 .. 600 bar are available

PM104RT,TME MAKE PRESSURE SENSOR

Additional Information:

• Item Code: PM104RT
• Delivery Time: 3-4 WEEK